Irrigation tank and mechanical bucket

The above values may be affected depending on the chassis overhead.

Adapted to IVECO, RENAULT, MERCEDES, SCANIA, or similar autobastidor.
Cistern made of S-275-JR 4 mm steel. thick. Internal treatment of epoxy resins to prevent corrosion.
It incorporates multiplier to decrease the revolutions needed to work with the chassis.
Irrigation pump and bucket driven through power take-off. With yields of 15 m3/h and 15 Kg/cm2
Two irrigation pineapples and double set of buckets.
Hose-holder reel with 25 mts. hose and 3-effects spear.
Electro pneumatic manipulator frame.
Control panel in cab for hydraulic system operation.
Loading mouth on the right side.
Three loading systems, by suction by means of the baldeo pump, by mains pressure and by gravity.
Flow drive with progressive control electrical control.
Tank level indicator tube.
Overflow tube with direct discharge to the ground without interfering with the chassis.
Approved time-travel device.
Fixed anti-cyclist protection bars.
White finish paint, just like the chassis cab.
Swivel headlamp amber approved.
Side tool holder drawer.

The project includes Technical Project and ITV.

Replacing the steel tank with a polyester or aluminium tank	Non-slip ladder with folding railings.
Second hose-carrier reel, 25 mts. hose and spear.	Folding staircase with folding railings.
10 m adjustable aluminium pole. hose and spear.	Rear irrigation bar by gravity or by pressure.
Joystick in cab instead of switch frame.	Cross bar of pressure bucket.
Vector of lights on cab.	Water meter.
Multistage pump of 15 m3/h and 18 Kg/cm2.	Rear view camera.
Multistage pump of 18 m3/h and 20 Kg/cm2.	Flow control system depending on the speed.
Pump supplement with shaft and stainless steel sleeves.	Water-saving system via Water-Air system.
Electric motor for winding with remote control.	Folding anti-cyclist protection bars.
Modification of the exhaust for couplings take force.	Enrolment.
Rear light panel.	Training course in the client's premises.
Polyester outer fairing of variable height depending on the chassis.	Rear cabinet for the transport of bulky tools (for fairings only).